- On Windows, Pro Tools LE was recording audio to the timeline early by approximately twice the H/W buffer size. (PTSW-130757)
* Audio was recorded early depending on the hardware buffer size selected. This problem was specific to Pro Tools LE 8.0.4 on Windows. Fixed in the included Pro Tools LE Avid Audio Drivers installer.

- On Windows, 002 and 003 optical signal is not monitored when Low Latency Monitoring (LLM) is enabled. (PTSW-130422)
* Optical signal was not passing through to Main Output on 002 and 003 when LLM was enabled. This problem was specific to the 002 and 003 devices running Pro Tools LE 8.0.4 on Windows. Fixed in the included Pro Tools LE Avid Audio Drivers installer.

- Volumes named using multi-byte language characters, such as Katakana, don't mount in DigiBase. (PTSW-58406, PTSW-131482)
* One can now use the full set of language options provided by the OS when naming audio volumes.

- Control Surfaces could display "Pro Tools has a Dialog on Screen" when there is no dialog on screen. (PTSW-130634)
* When any progress bar dialog is active, hiding Pro Tools until the progress bar finishes, then un-hiding Pro Tools makes Pro Tools think the progress bar dialog is still active. In this state Pro Tools appeared to be mostly unresponsive.

- Pro Tools would not launch on a user account configured for Open Directory access. (PTSW-130444)
* Application failed to launch on OS X systems configured for Network Home Directories (i.e. Open Directory). In 8.0.4, launching Pro Tools on a user account resulted in an assertion error when loading plug-ins, whereas in 8.0.3, Pro Tools crashed with "Pro Tools has unexpectedly quit" dialog.

- Tracks created using "Expand to New Tracks" would not allow audio to play back. (PTSW-125445)
* "Expand to New Tracks" now creates tracks muted, but with full metering functionality and audio playback.

- QuickTime playback of DV-PAL codec through Mojo stutters. (PTSW-130719)
* The stuttering of QuickTime playback was especially noticeable when manipulating the Pro Tools GUI during playback or having a video sync offset that wasn't divisible by four.

- Access violation occurs when applying a fade out on 1 sample region when the fade overlaps adjacent regions. (PTSW-131127)
* This access violation no longer occurs.

- On Windows, the Alt and Win keys get "stuck" on. (PTSW-124654)
* The Alt and Win keys can get into a state in which they appear to be pressed down all the time, with the only known solution to quit Pro Tools. On Windows XP, the problem is not eliminated but now it should be a simple matter of pressing the affected key once to disengage the "stuck" mode and return to normal operation. If some Pro Tools operations still appear unresponsive, wait 30 seconds until normal operation is restored.

- Audio routing could be lost when turning off DSP Cache during playback. (PTSW-130638)
* DSP Cache on/off switch is not accessible during playback. There is no need to toggle this parameter during playback as it only affects session close/open behavior.

- On Windows, runtime errors and crash when using ZIO ADR Express with Pro Tools and recording to ISIS volume. (PTSW-125770, PTSW-125771, PTSW-129529)
* Pro Tools would crash or a runtime error would be encountered while using ZIO ADR Express with Pro Tools during recording to ISIS volume, or immediately after recording to ISIS volume while editing, undoing, or scrubbing.

- Recording gets lost if timeline selection markers are moved during QuickPunch or TrackPunch record. (PTSW-128879)
* Moving the timeline selection markers during QP record would cause deletion of the file being recorded.

- DigiTrace log files (.dlog) not written when the user is not an Administrator account. (PTSW-53712)
* DigiTrace files were being placed next to the Pro Tools application, but this path was not allowed for non-admin users. To fix this, .dlog files are written to a new location:
o Mac OS X: /Users//Library/Logs/AvidLogFiles
o Windows XP: \Documents and Settings\\AvidLogFiles
o Windows 7: \Users/\AvidLogFiles

- On Windows, when selecting the Audio Plug-ins Guide link in the Help menu, the wrong guide is opened. (PTSW-129920)
* The correct guide is now opened.

- When selecting Audio Plug-ins Guide in the Help menu, a dialog appears: "Could not find help file DigiRack Plug-Ins Guide.pdf!" (PTSW-129870)
* This problem is fixed.

- The "Support FAQ.pdf" in Documentation -> Pro Tools is the wrong version. (PTSW-129915)
* The correct version is now installed. This problem affected Windows Pro Tools M-Powered only.

In August 2009 we announced that Pro Tools 8.0.1 would be the last full Pro Tools release to support PowerPC-based Macs, the original Mbox, and Expansion|HD chassis. We have continued to monitor the performance of 8.0.1 and now, based on user feedback, we are pleased to offer you one final Pro Tools software update—Pro Tools 8.0.1cs2—to address your most requested fixes.

- Fixed: Hang after committing a relink command (Item #126210)
* In some cases, Pro Tools could hang indefinitely when relinking to missing files that had fade files attached.

- Fixed: Pro Tools could crash after using the Shift+S shortcut to solo (Item #121375)
* Resolved an issue in which Pro Tools could crash after using the Shift+S keyboard shortcut to repeatedly solo/un-solo a track.

- Fixed: Locked Region Groups and Conforming (Item #3112)
* In Pro Tools 8.0.1, region groups containing one or more locked regions could cause some regions to become offset when conforming (i.e. shuffle mode edits). This issue is now resolved.

- Fixed: Trimming grouped MIDI regions (Item #121347)
* Pro Tools could crash (Mac) or post an Access Violation (Windows) when trimming out a grouped MIDI region containing automation data. This has been resolved.

- Fixed: Hang after clicking in certain fields in the Score Setup window (Item #121342)
* After clicking in the Below Title and Composer or Below Chord Symbols or Diagrams fields, Pro Tools would post the dialog, "This field requires values in the range of 5.00 and 999.00." Clicking OK would not close the window and the only option was to force quit.

- Fixed: When a selection contains tracks in playlist view and an aux track, pasting crashes Pro Tools (Item #121356)
* Issue resolved where Pro Tools would crash in certain situations when copying and pasting in playlist view.


- Fixed: Pro Tools wouldn't launch on Macs configured for Open Directory or Network Home Directories (Item #121361)
* On Mac systems configured for Network Home Directories (i.e. Open Directory), Pro Tools would post "Pro Tools has unexpectedly quit" error at launch. This has been resolved.

- Fixed: Pro Tools is unable to import audio files from some CDs (Item #125667)
* Pro Tools is unable to import audio files with names containing the characters : or / from CDs which have been cataloged by iTunes. Dragging files from the CD to Pro Tools causes a crash, the Import Audio dialog does not allow you to select the files for import, and the Workspace browser doesn't display the CD at all.

Fixed: Hang after committing a relink command (Item #122000)
* In some cases, Pro Tools could hang indefinitely when relinking to missing files that had fade files attached


Fixed: When writing plug-in automation in Latch mode, stopping the pass may cause Pro Tools to store different automation data than was being written while playing (Item #121997)
* In some cases, plug-in automation written in latch mode could contain an incorrect automation spike beyond the position where playback was stopped


Fixed: Kernel Panic when shutting down Mac if Mbox 2 was disconnected previously (Item #56617)
* Mac computers would kernel panic (crash) on shut down if the computer was started with an Mbox 2 USB device (Mbox 2, Mbox 2 Mini, or Mbox 2 Micro) attached, and the Mbox 2 is disconnected prior to shutdown.


Fixed: Pro Tools is unable to import audio files from some CDs (Item #123245)
* Pro Tools is unable to import audio files with names containing the characters : or / from CDs which have been cataloged by iTunes. Dragging files from the CD to Pro Tools causes a crash, the Import Audio dialog does not allow you to select the files for import, and the Workspace browser doesn't display the CD at all.


Fixed: Pro Tools wouldn't launch on Macs configured for Open Directory or Network Home Directories (Item #3123)
* On Mac systems configured for Network Home Directories (i.e. Open Directory), Pro Tools would post "Pro Tools has unexpectedly quit" error at launch. This has been resolved.


Fixed: Changing user on shared storage system while Pro Tools is launched does not update user access rights. Pro Tools must be relaunched for changes to be applied. (Items #122032, #57201)
* Previously, when changing users on a shared storage system, Pro Tools would not update its user access privileges for workspaces until Pro Tools was relaunched. Thus, a user who should have read/write permissions on a given workspace may have read only access. This has been resolved.

Fixed: Some Eleven Rack features, HyperControl with M-Audio keyboards, and MIDI Sysex dumps not functioning properly in Pro Tools 8.0.3 (Items #120240 and MISCCOMP-61)

* Pro Tools 8.0.3cs1 resolves an issue with MIDI Sysex in which some functions of Eleven|Rack, HyperControl with M-Audio keyboards, and MIDI Sysex dumps would not function properly.
* This release replaces the 8.0.3 Eleven Rack Update. All users who previously downloaded the 8.0.3 Eleven Rack Update should update to 8.0.3cs1.

- support pour Snow Leopard : ProTools LE 8.0.3 est compatible avec Mac OS X 10.5.5 - 10.5.8 et Mac OS X 10.6.1 - 10.6.2

- mise à jour de maintenance de la version 8 : liste des corrections

- mise à jour des plug-in AIR pour Snow Leopard

- Fixed: Improved horizontal scrolling with track balls and Apple Mighty Mouse (Item #119003)
* Optimized scrolling speed and performance with track balls and Apple Mighty Mouse. The scroll speed is now more consistent with using the right/left arrow buttons in Pro Tools.
* Users should also install the latest drivers for their input device (from Apple, Logitech, Kensington, etc.)


- Fixed: Exiting the Start/End/Length fields using "/" (the forward slash key from the numeric keypad) caused the entered value to be ignored (Item #118727)
* Resolved an issue in which using the "/" key (forward slash key from the numeric keypad) to exit the Start/End/Length fields after entering a value would cause the entered value to be ignored. This broke the workflow with several 3rd party conform applications.


- Fixed: With 002/003, Core Audio Manager would always default to 48kHz after setting it to 44.1kHz and closing the Core Audio Manager. This would cause unpredictable results with 3rd party applications. 88.2kHz/96kHz were not affected. (Item #119266)
* With 003, 003 Rack, 003 Rack+, Digi 002 or Digi 002 Rack, Core Audio Manager would always default to 48kHz after setting it to 44.1kHz and closing the Core Audio Manager. This would cause unpredictable results with 3rd party applications. 88.2kHz/96kHz were not affected.


- Fixed: In some cases, Avid video or satellite track edits don't align properly with video clips in AAF sequence (Item #118252)
* In some cases, a satellite or Avid video track could incorrectly show edits that did not align with the original AAF sequence from Media Composer

Avid/Digidesign is pleased to announce the immediate availability of a prerelease version of Pro Tools® software that provides expanded Mac OS X 10.6.x Snow Leopard compatibility to Pro Tools 8.0 users. Pro Tools 8.0.3pr software is provided as a convenience for Mac-based Pro Tools 8.0.x users who may wish to begin their transition to Snow Leopard before a fully tested and qualified version of Pro Tools becomes available.

- Fixed: A play command in Pro Tools may not always engage playback on the first attempt (Item #114517)
* After the play command, the Play and Stop buttons flash, but Pro Tools does not play. Subsequent tries will allow playback. This has been fixed in most configurations.

- Fixed: "Dialog On Screen" appears randomly on control surface scribble strips (Item #105662)
* In certain scenarios, control surfaces with scribble strips would flash a false "Dialog On Screen" message.

- Fixed: DAE -9136 during playback with Mbox (Item #83438)
* In some cases on OS X, Pro Tools LE would post a DAE -9136 error during playback with Mbox. This issue did not occur with Mbox 2.

- Fixed: Time stamp information missing from audio files exported from Pro Tools 8 (Item #113295)
* When WAV or AIFF files were exported from Pro Tools 8, the User and/or Original time stamp appear as 00:00:00:00 rather than reflecting the actual time stamp.

- Fixed: Can't Use the Zero Numeric Key Shortcut for Play/Stop when the Workspace Browser is Open (Item #114167)
* Pro Tools 8cs2 introduced an issue where you could no longer use the Zero numeric key keyboard shortcut to start or stop playback while the Workspace Browser was open.

- Fixed: JL Cooper CS-10 Not Recognized (Item #113713)
* The JL Cooper CS-10 control surface was not recognized by Pro Tools 8.

- Fixed: Sluggish Scrolling Performance in Pro Tools 8 (Item #117308)
* When scrolling vertically or horizontally in Pro Tools 8, performance was sluggish compared to previous versions. Scrolling performance is now improved in Pro Tools 8.0.1.

- Fixed: Pro Tools displays Clip Name instead of File Name when importing some audio files from the Workspace Browser (Item #115926)
* When importing an audio file that was created in Pro Tools 7.x into Pro Tools 8 via the Workspace browser, Pro Tools used the Clip name instead of the File name. This would not occur if importing via File>Import or dragging the file in from the Finder or Windows Explorer. This is resolved in Pro Tools 8.0.1. You must select the folder containing the audio files in the Workspace Browser and select Update Database for Selected before importing in order for this change to take affect.

- Fixed: Field recorder file names can get truncated when importing (Item #115946)
* Field Recorder files with names that exceed 31 characters get truncated when importing into Pro Tools from the Workspace Browser.

- Fixed: A play command in Pro Tools may not always engage playback on the first attempt (Item #114517)
* After a play command, the Play and Stop buttons may flash, however, Pro Tools does not playback. Subsequent tries would allow playback.

- Fixed: Cannot open sessions due to PolyVector error (Item #114287)
* Certain sessions cannot be opened due to the following error: "Could not complete your request because out_of_range: Cmn_PolyVectorImpl::At"

- Fixed: Audible drift when using PAL to Film TCE conversion on long audio files (Item #113490)
* Using the Time Shift Varispeed preset (PAL to Film -4%) will result in a file that drifts over time and runs out of sync with picture.

- Fixed: OS X may become unresponsive while using Core Audio applications with Mbox 2 USB interfaces (Item #100422)
* The operating system becomes unresponsive (spinning beach ball, freeze, or "kernel panic" message), requiring a restart of the computer.

- Fixed: With Original Mbox on Intel-Based Macs, DAE Error -9136 Could Occur During Playback (Item #83438)
* This problem does not occur on any Mbox 2 products or PowerPC-based Macs
* Please note that for Intel-based macs only, this fix will add approximately 3ms of monitoring latency when performing with virtual instruments
* This fix eliminates many, but not all instances of error -9136 during playback with the original Mbox on Intel-based Macs.

- Fixed: A play command in Pro Tools may not always engage playback on the first attempt (Item #114517)
* After a play command, the Play and Stop buttons may flash, however, Pro Tools does not playback. Subsequent tries would allow playback.

- Fixed: Cannot open sessions due to PolyVector error (Item #114287)
* Certain sessions cannot be opened due to the following error: "Could not complete your request because out_of_range: Cmn_PolyVectorImpl::At"

Fixed: Audible drift when using PAL to Film TCE conversion on long audio files (Item #113490)
* Using the Time Shift Varispeed preset (PAL to Film -4%) will result in a file that drifts over time and runs out of sync with picture.

- Fixed: OS X may become unresponsive while using Core Audio applications with Mbox 2 USB interfaces (Item #100422)
* The operating system becomes unresponsive (spinning beach ball, freeze, or "kernel panic" message), requiring a restart of the computer.

- Fixed: With Original Mbox on Intel-Based Macs, DAE Error -9136 Could Occur During Playback (Item #83438)
* This problem does not occur on any Mbox 2 products or PowerPC-based Macs
* Please note that for Intel-based macs only, this fix will add approximately 3ms of monitoring latency when performing with virtual instruments
* This fix eliminates many, but not all instances of error -9136 during playback with the original Mbox on Intel-based Macs.

- Fixed: OS X may become unresponsive while using Core Audio applications with Mbox 2 USB interfaces (Item #100422)
* The operating system becomes unresponsive (spinning beach ball, freeze, or "kernel panic" message), requiring a restart of the computer.
Please Note: Connecting or disconnecting an interface while the computer is turned on (hot swapping) can also cause problems with the operating system, such as "You need to restart your computer" (kernel panic) messages. This is a separate issue unrelated to the fix listed above. Hot swapping is not recommended with any audio interface, particularly when that interface is being used by an application.

- Fixed: Elastic audio regions may be deleted from disk unintentionally (Item #113242)
* Elastic regions that are the same length as the original audio file may be deleted from disk after performing "select unused" and then "remove unused" files.

- Fixed: Potential crash when showing a previously hidden Tempo ruler(Item #113251)
* If a session was saved with the Tempo Editor visible but the Tempo ruler hidden, opening that session and then showing the Tempo ruler may cause a crash.

- Fixed: Potential crash when selecting leftover playlists from other tracks (Item #113365)
* Pro Tools may crash when selecting leftover playlists after the previous parent track has been deleted.

- Fixed: "No valid network adapter" error message when launching Pro Tools (Item #106117)
* When launching Pro Tools or accessing the Peripherals dialog without an Ethernet cable connected to the computer, an error message is posted: "No valid network adapter is available for Video Satellite connections."

- Fixed: Audio imported from certain QuickTime movies may play at half speed (Item #113551)
* Audio data, e.g. guide tracks, imported from certain QuickTime movies may play back at half speed.

- Fixed: Low memory situations and potential crashes when using X-Form Elastic Audio Plug-In along with many audio regions on a track (Item #112644)
* With several hundred audio regions on a track, switching to X-Form as the Elastic Audio algorithm may cause low memory errors and lead to a crash.

- Fixed: Slow preview and render speed with X-Form Elastic Audio Plug-In (Item #112958)
* Preview and/or rendering performance with X-Form on Elastic Audio tracks is improved in 8.0cs3 (compared to 8.0).

- Fixed: Audible drift when using PAL to Film TCE conversion on long audio files (Item #113490)
* Using the Time Shift Varispeed preset (PAL to Film -4%) will result in a file that drifts over time and runs out of sync with picture.

- Fixed: Intermittent crashes during playback or record (Item #113294)
* Pro Tools may intermittently crash during normal playback or recording workflows.

- Fixed: Certain sessions may not open due to a "bus error" (Item #113772)
* Certain sessions created in Pro Tools 7.4.x may not open in Pro Tools 8 due to a "bus error in main thread" error message.

- Fixed: Cannot open sessions due to PolyVector error (Item #114287)
* Certain sessions cannot be opened due to the following error: "Could not complete your request because out_of_range: Cmn_PolyVectorImpl::At"

- Fixed: Missing audio while recording with Destructive Punch (Item #78780)
* After a record pass using Destructive Punch, there may be a waveform present but no audio recorded to disk.

- Fixed: Surround sound compatibility update for TL Space Native Edition (Item #113681)
* Fixes surround sound compatibility when TL Space Native Edition is used with Complete Production Toolkit or Pro Tools HD

- Fixed: Video and audio play back out of sync after recording with pre-roll enabled (Item #113765)
* Recording video with pre-roll enabled will cause audio and video to be offset by the pre-roll amount when playing back.

- Fixed: "Audio engine play startup deadline was missed" while using Satellite Link (Item #114214)
* This would occur on Satellite systems that did not initiate playback. This error has been removed. If Satellite systems are encountering problems while linking, please contact Technical Support.

- Fixed: Intermittent "Engine not responding" error when working with Reason via ReWire (Item #107636)
* When launching a session that contains Reason ReWire, Reason posts a dialog "Engine not responding. Please check your ReWire host."

- Fixed: Crash when accessing Hardware Setup dialog with VENUE FWx card connected (Item #113462)
* Pro Tools would crash when accessing the Hardware Setup dialog with VENUE FWx card connected.

- Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
* Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

- Fixed: Problems moving multiple selected regions (Item #99538)
* If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.

- Fixed: Incorrect multi-track audio import from QuickTime movies (Item #102279)
* Multi-track QuickTime movies import into Pro Tools 7.4 with each audio track containing a mix of all tracks, rather than individual tracks.

- Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
* Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

- Fixed: Problems moving multiple selected regions (Item #99538)
* If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.

- Fixed: Incorrect multi-track audio import from QuickTime movies (Item #102279)
* Multi-track QuickTime movies import into Pro Tools 7.4 with each audio track containing a mix of all tracks, rather than individual tracks.

- Fixed: Regions Are Inadvertently Deleted and Pro Tools Crashes When Opening Sessions Which Had Their Session Start Time Changed (Item #113177)
* After changing the session start time and maintaining time code, Pro Tools will delete additional playlists and crash with a kernel panic after saving and closing the session. You may see any of the following errors prior to the crash: "Could not complete the close session command because basic_string::_S_create" or "Bus error" in thread "Main Thread", at address 0x0."

- Fixed: Crash When Moving an Automated Plug-in from Inserts F-J to Inserts A-E (Item #113115)
* Moving (dragging) an automated plug-in from inserts F-J to inserts A-E while the automation lane for one of the plug-in's parameters is visible may crash Pro Tools.

- Fixed: When Using Inserts F-J, Plug-in Automation Written to One Plug-In Will Overwrite Other Automation or be Erased (Items #113097 & #113120)
* Writing automation to one plug-in located on inserts F-J will cause the same automation data to be written to all other plug-ins located on insert F-J on the same track. Previously existing automation will be overwritten (or erased if the "Plug-In Controls Default to Auto-Enabled" preference is checked) after saving, closing and reopening the session.

- Fixed: With a Surround Send, Pan Automation Gets Stuck in One Channel on Playback (Item #112702)
* When assigning sends to a bus sub-path and using the "follow main pan" function, send pan automation may get stuck and not play back dynamically.
* Applies to Complete Production Toolkit users only

- Fixed: Avid Video Playback is Offset by Pre-Roll Amount When Pro Tools is Online (Items #112452 & #112456)
* When chasing time code and simultaneously playing back Avid video via Mojo or Mojo SDI hardware, setting pre-roll in Pro Tools will cause picture to be offset by the pre-roll amount. Additionally, video playback will stop before the end of the video clip.

- Fixed: Magic ID Error When Opening Sessions (Item #112750)
* In certain cases sessions will not open due to the following error: "Could not complete the Open Session command because magic ID does not match while translating Session Window Config." This error is more likely to occur in tandem with very large track counts (~100) and long (>1 hour) recordings.

- Fixed: Mouse Offset and General GUI Problems With Third Party Plug-ins (Item #112890)
* Certain third party plug-ins such as Addictive Drums or UVI Workstation will not function correctly under Pro Tools 8. Mouse clicks are vertically offset and parts of the plug-in GUI will not draw correctly.

- Fixed: Converting Sample Rate During Save Copy In or Import Session Data Adversely Affects Volume Automation (Item #111930)
* Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

- Fixed: Crash When Removing Files that are also used in Transfuser (Item #107710)
* Removing a file from the Pro Tools region list or project browser may crash Pro Tools if another audio file with the same name is already used by Transfuser.

- Fixed: Channel width changes may remove downstream mono plug-ins and related automation without warning. (Item #112589)
* Changing the channel width by inserting a mono-to-stereo plug-in to a mono track will remove a downstream mono plug-in (and all its automation data) that resides on underlying insert slots without warning.

- Fixed: Satellite Protocol Communication Issues
* This fix is recommended for all users of Video Satellite LE
* When using Pro Tools 8.0cs1 or higher with Video Satellite LE, all connected satellite systems must be running Pro Tools 8.0cs1 or higher.
* Pro Tools 8.0 cannot be connected as a satellite to other systems running Pro Tools 8.0cs1 or higher.

- Superbe nouveau look
Bénéficiant d'une superbe nouvelle interface, de fonctionnalités et d'une interactivité améliorées, Pro Tools 8 n'a jamais été aussi simple et aussi rapide à utiliser, tout en offrant encore plus d'options de personnalisation afin de répondre à vos besoins.

- Un studio complet
Pro Tools 8 est livré avec plus de 70 plug-ins révolutionnaires d'instruments virtuels, d'effets et d'utilitaires, et plus de 8 Go de boucles audio pour donner un coup de fouet à votre créativité.

- Plus de pistes dans Pro Tools LE et Pro Tools M-Powered
Les utilisateurs de Pro Tools LE® et Pro Tools M-Powered pourront maintenant utiliser jusqu'à trois fois plus de pistes audio qu'auparavant (jusqu'à 48 pistes audio simultanées, mono ou stéréo) , pour créer des mixages plus importants et plus sophistiqués.

- Écrivez votre musique
Le nouvel Éditeur de Partitions vous permet de visualiser, éditer, arranger et imprimer les informations Midi sous forme de notation musicale, et donc de composer en utilisant directement les outils d'écriture musicale ou la transcription des données Midi en temps réel.

- Programmation et production Midi complètes
La toute nouvelle fenêtre de l'Éditeur Midi dans Pro Tools 8 emmène la programmation dans Pro Tools à un niveau supérieur, embarquant un ensemble complet de nouvelles fonctions d'édition et d'outils Midi, qui rendent encore plus simple la composition à l'aide d'instruments virtuels et de modules sonores.

- Modifier la hauteur
Transposez sans difficultés une région dans une autre tonalité, ou corrigez la hauteur en temps réel grâce au nouvel Elastic Pitch, le complément idéal de l'Elastic Time.

- Gestion des contrôleurs étendue
Pro Tools 8 améliore l'intégration des consoles ICON console, des surfaces de contrôle Digidesign® et des périphériques M-Audio®, permettant de commander vos plug-ins directement de votre contrôleur et bien d'autres choses encore.

- Fixed: When Recording, Waveform Overviews are Missing or Drawn with Gaps (Item #100862)
The audio was not affected, and the waveform could be restored by re-calculating it after the record pass

- Fixed: Pro Tools and Reason Crash When Loading "Machine" Patches on Reason Adapted Combinator (Item #106627)
Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools

- Fixed: Volume Breakpoints at "- inf" Could Change to Full Volume When Manually Trimming Automation (Item #104551)
This could occur when trying to trim breakpoints at minus infinity down a few dB

- Fixed: Pro Tools and Reason Crash When Loading "Machine" Patches on Reason Adapted Combinator (Item #106627)
Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools

- Fixed: When Recording, Waveform Overviews are Missing or Drawn with Gaps (Item #100862)
The audio was not affected, and the waveform could be restored by re-calculating it after the record pass

- Fixed: Attempting to Drag and Drop Files Containing iXML metadata from the Workspace Browser Would Result in No Import, and Assertion Errors (Item #100723)
The assertion errors would occur when attempting to subsequently save the session
Previous workaround was to use File > Import > Audio instead of drag and drop from the Workspace

- Fixed: Despite Changing the Fade Shapes in the Fade Dialog, Fade-ins and Fade-outs Always Conformed to the Last Created Fade In and Out (Item #100913)

- Fixed: Volume Breakpoints at "- inf" Could Change to Full Volume When Manually Trimming Automation (Item #104551)
This could occur when trying to trim the breakpoints down a few dB.