reverb with spatial positioning
MReverb is a special reverb designed for mixing, particularly spatial positioning, which has been a very hard and time-consuming task.
When you listen to a good mix, you should be easily able to place each sound source to some spot in the space. Otherwise all instruments will appear at the same position and the mix may sound muddy. And this is exactly what is MReverb for. You need to specify room properties and then you only need to move the sound source where you want and MReverb will try to make it sound like the object is on that spot.
Moreover MReverb has 4 fully configurable modulators useful to make incredible effects. Global modulators can move any parameter and make your sound truly interesting.
* Spatial positioning system - using a simple view you can easily drag the sound source and MReverb will set all required parameters to make it sound like it is in specified room and position.
* Fully adjustable 3-band equalizer you can use to control sound of the reverberation signal, hence the room sound.
* 4 global modulators - in each instance you can have up to 4 modulation full-featured LFO, that can modulate any parameter including other modulators! This way you can make the sound move in time, be less static and more interesting!
* Fully algoritmic and true stereo reverb - MReverb does not need separate plate, hall, and room algorithms. Instead it has a huge set of intuitive parameters that allows you to easily emulate any given reverb characteristic. Anything from small rooms to extremely large halls with almost infinite reverb tails...
* Extremely advanced and easy-to-use user interface - our products are always workflow enhanced. You can easily change all values and gain maximal accuracy using textual editing. Smooth visualization of resulting response with almost unlimited zooming...
* MIDI controllers with MIDI learn - you can map any parameter to any MIDI controller or MIDI keyboard and control it realtime or record and automate it.
* Global preset management - using a title button you can save your settings, which are shared on the computer, so you can easily access them in other songs.
* 64-bit processing and unlimited sampling rate, recommended maximum is 384kHz. MReverb has incredibly low harmonic distortion.
* Very fast, optimized for SSE and SSE2 processors.
* Full automation.
 |
Version 5.01 |
MacOS X Intel |
(AU, VST) |
May 22, 2011 |
MReverb 5.01 compatibility update changes
Surround is now off by default, because it causes problems with some hosts (known are FL Studio and Studio One). If you use surround processing, please enable "Activate surround" in the plugin settings, it will enable all plugins at once.
Plugins can now access additional volumes on Mac OS X.
Band editor in equalizers doesn't close when clicking on a band type any more and shows filter steepness.
Fix: Plugins could crash in AU when requested mono to stereo configuration.
Fix: Styles are now moved to user data folder, because some computers have permission problem with all-users directory.
Fix: MFilter caused massive gain in parallel mode in some special circumstances.
Fix: Analyzer in equalizers didn't show correct spectrum if activated after upsampling change.
Fix: MMultiBandConvolution didn't remember custom paths correctly on Mac OS X.
MReverb 5.00 changes
Dual user interfaces - most commercial plugins now contain 2 interfaces, a simple default one with several predefined modes, but just a few controls, and an advanced one. This makes the plugins not only extremely versatile, but also quick and easy-to-use.
Unique new analysis engine for MAnalyzer and all equalizers - new analysis engine is faster, more accurate and provides a whole new range of unique features, such as micro-sonograms, full sonograms, super-resolution (providing high resolution for low frequencies keeping speed for the high frequencies), prefilters (for loudness curves) or deharmonization (for easier fundamental frequencies analysis).
Plugins are now categorized under VST and VST3 - with more than 55 plugins it started to be hard to find the plugin you need, therefore they are now categorized by purpose to Dynamics, EQs etc. With VST3 they also fit the standardized structure in your host (if it supports it).
Added next/previous preset buttons.
Added A/B switch to swap between previous two A-H presets.
Added 0% & 100% modes for global dry/wet for all multiband plugins.
Increased accuracy when dragging Q in equalizers.
Added "use first parameter's range" mode for modulators and multiparameters.
Added a few shortcuts to control zooming in graph editors.
Added global surround switch useful to make the plugins more compatible with some hosts.
Added resizing arrow for resizable windows.
Added smooth 2 envelope point mode.
Upsampling range extended to 16x.
Multiband peakmeters can now show different channels in surround.
Optimized preset and settings storage.
Preset exchange is now enabled by default, can be disabled in Settings.
Fix: Resizing windows with splitters changed ratio of the splitters.
Fix: Resizable windows were sometimes showing arrow cursor over a position, where the window couldn't be resized.
Fix: Demoversions with sidechain were crashing occasionally.
Fix: Plugins with sidechain were occasionally crashing on Mac AU.
Fix: A Windows message was poping when trying to access an unavailable drive.
Fix: Upsampling latency wasn't reported correctly.
Fix: Improved automation support with Ableton Live.
Fix: Plugins didn't store bypass state.
Fix: Multiparameters in switch mode were showing inverted state.
Fix: Alt+Click in a graph editor caused maximum zoom, which is now disabled.
Fix: Units in zoomed mode were sometimes showing invalid grid lines.
Fix: Temp gain wasn't updated when automated/modulated.
 |
Version 3.00 |
MacOS X Intel |
(AU, VST) |
Jun 20, 2010 |
* Kernel heavily upgraded and optimized.
* Smart-learn feature for all modulators & multiparameters - just enable it and move anything in the plugin and the modulator/multiparameter will learn what parameters you used including intervals.
* A-H presets can be switched via program change MIDI message.
* Last randomization can be undone by holding shift and pressing Random button.
* Optional confirmations on destructive actions.
* Advanced oscillator shape processing graphs enabled only when turned on.
* Phase is now represented in degrees and percents.
* Smart interpolation for vibrato & flanger minimizing artifacts when modulating depth.
* Added bypass to the title.
* Fix: MIDI & general settings save/load.
* Fix: Preset selector couldn't expand/collapse folders.
* Fix: Oscillators caused jittery images when modulating shape.
 |
Version 2.06 |
MacOS X Intel |
(AU, VST) |
Mar 13, 2010 |
* Improved upsampling algorithm performance.
* Improved compatibility with several hosts.
* Fix: Plugin reset removing tails.
* Fix: Multichannel processing wasn't optimized enough and caused crashes.
* Fix: AU MIDI input.
* Fix: Denormalization problems causing high CPU usage when processing silence.
 |
Version 2.05 |
MacOS X Intel |
(AU, VST) |
Feb 26, 2010 |
MReverb 2.05 changes
* Added mono compatibility.
* Added envelope follower for each modulator as an alternative to the oscillator. Useful for auto-wah and similar effects.
* Adjustable modulator protection for superior sound quality.
* Fix: Denormals causing low speed of upsampling.
MReverb 2.04 changes
* Added tree parameter selectors for easier workflow.
* Added integrated activation by drag & dropping your licence file into the plugin or using system clipboard.
* Improved upsampling filters.
* Improved style for better visibility.
* Added "Submit preset" to send settings to MeldaProduction to be included in next versions. Good preset creators may be awarded by free software.
* Improved Mac OS X compatibility.
* Fix: Upsampling could cause ceiling to 0dB.
* Fix: Assembler optimizations could cause problems.
 |
Version 2.03 |
MacOS X Intel |
(AU, VST) |
Feb 7, 2010 |
* ABCD morphing feature.
* Improved Windows 64-bit and Mac OS X compatibility.
* Randomization improved to apply only on useful parameters.
* Immediate editor resizing.
* Kernel optimizations.
* Improved Mac OS X installer.
* Fix: Text value editing in modulators, MIDI controllers and multiparameters.
* Fix: Drag using trackers outside of window caused jumping to the other side.
 |
Version 2.02 |
MacOS X Intel |
(AU, VST) |
Jan 20, 2010 |
* Preset storage optimized.
* Fix: Certain parameters could cause infinite cumulating feedback.
* Fix: Modulator could replace values on loading presets.
* Fix: Added modulator target did not preserve original value.
 |
Version beta2 |
MacOS X Intel |
(AU, VST) |
Jan 10, 2010 |
Second beta release for mac
- it is may not stable.
- it is not very optimized.
- it is Intel only (PowerPC support probably will not be added at all)
- we are not sure about Mac OS X version requirements.