This update improves overall stability and addresses some minor issues.

Compatibility
Resolves an issue which could cause unexpected feedback in Logic after importing a song from GarageBand for iPad.
Selecting the "Open Apogee Control Panel" command will now launch Apogee's Maestro 2 application if a Duet 2 is attached.

Performance and Stability
Resolves an issue in which Logic might quit unexpectedly when creating a new project.
Resolves an issue in which Logic might quit unexpectedly when moving audio regions in the Arrange window.

Plug-Ins
Resolves an issue introduced in Logic 9.1.4 in which LFO sync for some Logic plug-ins did not sound as expected.
Resolves an issue introduced in Logic 9.1.4 in which automating the Wet/Dry mix control in Delay Designer resulted in zipper noise.
The EVB3 plug-in now correctly responds to sustain off messages.
Direct text input of the pitch reference for the Tuner plug-in now works correctly.

General
Fixes ain issue in which performing undo after recording a MIDI take sometimes caused the MIDI track to stop sounding.
The "Toggle Zoom to Fit Selection or All Contents" key command now correctly recalls the the previous zoom view rather than zooming in on the entire project.
Resolves an issue introduced in Logic 9.1.4 in which some regions might shift out of position after using the Pack Take Folder command.
Fixes an issue in which Japanese key command sets were not available if Logic was updated to version 9.1.4 before launching Logic for the first time.
Resolves a rare take folder issue in which performing undo after deleting a comp section could cause regions in subsequent tracks to shift to the next adjacent track.
Fixes an issue in which take folders would not sound on soloed tracks if the Track Mute/Solo mode was set to CPU-saving (Slow Response).

This update improves overall stability and addresses a number of minor issues, including the following:
* Support for opening projects imported from GarageBand for iPad.

Resolves problems related to the support of Hyper-Threading

Some issues addressed in this update include but are not limited to:

Performance and Stability
* Logic's performance while playing movies at larger than 300% native size in 64-bit mode has been improved.
* Resolves an issue that could cause the warning dialog "Memory Getting Low" to appear when simultaneously recording multiple tracks in 32-bit mode.
* Resolves an issue that could cause the warning dialog "Specified volume doesn't exist -35" to appear when simultaneously recording multiple tracks in 32-bit mode.
* Using the Undo command after a "Bounce in Place" command now correctly reinserts used plug-ins on the channel strip.
* Performing Undo after using the "Bounce - Replace All Tracks" command now correctly restores all automation.
* Resolves an issue that sometimes caused Logic to stop responding when loading a setting for a mono plug-in in a multi-mono surround configuration.

Compatibility
* Improves compatibility with 6- and 12-core Mac Pro systems.
* Supports iOS control surface apps that utilize the OSC protocol.
* Supports REX files when running in 64-bit mode.
* Improves compatibility with select Audio Unit plug-ins.
* The expanded System Performance window now accurately reflects the number of available real cores on all supported computers.
* Logic no longer inadvertently reloads the content for third-party sampler plug-ins such as Native Instrument's Kontakt after tracks are deleted, or after some other edits are performed.
* Resolves an issue introduced in Logic 9.1.1 that could cause the spacebar to incorrectly trigger playback in Logic while the Melodyne plug-in window had focus.
* Logic Control or Mackie Control hardware control surfaces no longer switch to plug-in edit view when a plug-in on slots 8-15 is removed.

MIDI Editing
* Resolves an issue introduced in Logic 9.1 where using the Marquee tool to trim the end of a MIDI region could extend the number of loops for regions earlier in the same track.
* The Piano Roll now updates as expected to show the currently selected MIDI take.
* Resolves an issue in Logic 9.1.1 which could cause the Score to not display all notes from a region that had been split with the Scissors tool.
* The appearance of downward slurs and ties has been improved in the Score window.
* When pasting MIDI events into the Arrange area, the playhead no longer jumps unexpectedly to a position far to the right of the end of the pasted content.

Instruments and Effects
* Amp Designer now reliably maintains saved non-default EQ settings when a project is reloaded.
* The Wah Wah stompbox now responds more reliably to expression pedal input.
* EXS24 loads and plays back instruments that use short AAC or ALAC audio files when Virtual Memory is disabled.
* Corrects an issue that could cause the "Next Plug-in Setting or EXS Instrument" key command to change settings on the wrong plug-in.
* It is possible again to copy and paste sequences between Voices within an Ultrabeat pattern.
* A Software Instrument with a Send set to Post Pan no longer loses audio output when the Aux it sends to is soloed, and the Software Instrument's pan is adjusted.
* Software Instrument tracks with the AUNetReceive plug-in no longer exhibit excessive latency.
* The Noise Gate no longer creates audible clicks while processing audio with the plug-in GUI open.
* Double-clicking an insert slot will close the associated plug-in if it is open and set to Link Mode.
* In the EXS Editor, a mouse roll over of an audio file name now displays the full path for the file.
* The EXS Editor now properly displays all Groups even those that have the same name.

File Handling and Management
* Resolves an issue which sometimes caused the text after a period in a plug-in setting name to be lost on the first save of the setting.
* Resolves an issue from Logic 9.1.1 which forced exported MIDI files to have a .logic extension rather than the .mid extension.
* Import of folder tracks from other projects now works reliably.
* Bank and Patch names in Multi-instruments now import correctly when using the Track Import feature.
* Resolves an issue which could cause the Track Import window to become non-functional in certain rare cases.
* Import of stereo Input Channel Strips from other projects now works reliably.
* It is again possible to drag split stereo audio files from the Finder into the Arrange window.
* The mute status is now maintained for tracks imported from other projects using Selective Track Import.
* The "Export Region as Audio File" and "Export Track as Audio file" functions now add tempo information to the exported files.
* The EXS24 now automatically locates samples stored in a folder inside the Project Folder that have any of the following names: "Samples," "Sampler Files," "Sampler Instruments," or "Audio Files."
* When a project is opened from a project folder that has been copied, EXS24 now loads samples from the copied location instead of the original.
* It is now possible to drag and drop an AIFF audio file copied from a CD into the Audio Bin in the Media area of the Arrange window.
* The project name is no longer truncated if a period is added to the project name when performing a Save As for the project.

General Issues
* Resolves an issue where applying a crossfade with the crossfade tool might affect existing crossfades on the same track.
* A marker is no longer created unexpectedly when the Open Marker Text command is used.
* The relative movement of the mouse when editing multiple automation nodes has been improved.
* The mouse pointer no longer incorrectly shows the Freeze pointer when editing volume, pan, send, mute or solo automation on frozen tracks.
* Help tags for the Marquee Strip now show the correct range.
* Soloing an Auxiliary channel strip whose source is a Bus from another Auxiliary channel strip now works as expected.
* Copying a MIDI region on a ReWire track no longer creates an unexpected new track.
* Cutting a region at a point earlier than the anchor at high zoom levels no longer causes the region to move unexpectedly.
* Plug-ins now open with Link mode enabled when they are invoked by entering Plug-in edit mode on a remote control surface.
* When a channel strip is muted, pre-fader sends on the channel strip are now muted as expected.
* Reordering multiple Control Surface objects in the Control Surface Setup window now behaves more reliably.
* Performing comp edits while recording will no longer create graphic artifacts in the Take Folder.
* The behavior of the key commands to adjust Marquee selection borders based on transients has been improved. See this article for details.
* There is no longer audible stepping with automated volume changes at low fader levels.
* Touch automation mode now works correctly with Sculpture's Object Position 2 parameter.
* Quantize parameters are now correctly maintained when a region is divided.
* The vertical position guide when moving/copying a flexed region is now correctly positioned at the left edge of the region in projects that start earlier than position 1 1 1 1.
* The Optimize file(s) command now properly affects both channels of a split stereo file.
* Delete now works properly on selected regions within undisclosed groups in the Audio Bin.
* Resolves an issue introduced in Logic 9.1.1 that could cause channel strips with default names to display incorrectly on EuCon control surfaces.
* The "Reset All I/O Labels" command once again works as expected.
* Regions dragged from the Audio Bin to tracks within folders in the Arrange window are now correctly positioned.
* Contextual menus now appear as expected when Control- or right-clicking entries in the Audio Bin in the Media area of the Arrange window.
* Performing Undo after adding tempo events to a project no longer inadvertently modifies the selections for the active comp in a take folder.
* Regions with a negative value set for Delay in the Region Inspector are now rendered properly with Bounce Region in Place.
* Bounce Regions in Place now works properly on record-enabled audio tracks.
* The current scroll position in the Audio Bin will not jump unexpectedly after renaming an audio file.
* The color and icon assigned to a track are now properly maintained when tracks are imported using Selective Track Import.
* Using the Backspace to remove all characters in the File Browser's search field no longer causes it to lose key focus.
* Imported linked stereo files will now load with all other audio files in a Project without sometimes displaying a dialog that states "Unequal Stereo Regions Corrected."
* The MIDI channel number is now appended to the channel strip name when new tracks are created using the "New Track with Next MIDI Channel" menu option.

# This update delivers improved compatibility and numerous fixes.

# Issues addressed include:
* - Improved stability of the 32-Bit Audio Unit Bridge
* - Compatibility with Novation's Automap feature in 64-bit mode.
* - Compatibility with Euphonix Eucon protocol in 64-bit mode.

# Issues addressed include:
* - Support for 64-bit native mode
* - Compatibility with 64-bit Audio Unit plug-ins
* - File names with over 32 characters are now supported
* - Samples are now mapped correctly when using the "Contiguous Zones" option in the EXS editor

# Updated System Requirements:
* - 32-bit mode requires Mac OS X 10.5.7 or later
* - 64-bit mode requires Mac OS X 10.6.2 or later

# This update delivers improved compatibility and numerous fixes.
# Issues addressed include:
* - Support for 64-bit native mode
* - Compatibility with 64-bit Audio Unit plug-ins
* - File names with over 32 characters are now supported
* - Samples are now mapped correctly when using the "Contiguous Zones" option in the EXS editor

* This update improves overall stability and provides numerous fixes and enhancements.

* Issues addressed include:
o - Flex Markers can align & snap to MIDI notes
o - Performing a punch-in recording with Replace Mode now behaves correctly
o - The I/O plug-in adds an option for latency compensation
o - TDM plug-ins now behave as expected. (Only affects users with Pro Tools HD audio hardware.)

* The update is recommended for all users of Logic Pro 9.

* This update improves overall stability and provides numerous fixes and enhancements.

* Issues addressed include:
o - Flex Markers can align & snap to MIDI notes
o - Performing a punch-in recording with Replace Mode now behaves correctly
o - The I/O plug-in adds an option for latency compensation

* The update is recommended for all users of Logic Pro 9.

Flex Time
Flex Time is a new collection of features that lets you manipulate timing and tempo quickly and creatively. Experience editing without all the cutting.

- Flex Tool
The new Flex Tool lets you push audio around with your mouse by clicking and dragging anywhere on the waveform — forget all that tedious splicing and editing.

- Audio Quantize
It's not just for MIDI anymore. Now you can conform the timing of an audio region to a musical grid, or to the feel of another track, instantly correcting a performance.

- Editing drum tracks
Use Slicing Mode with drums and you won't compromise a single attack. Edit across a set of grouped multitrack drums and everything stays locked perfectly in phase.

- Varispeed
Slow down or speed up an entire multitrack project effortlessly, whether you want to try out different tempos or take it slow while you play a difficult solo.

- Flex Modes
Whether you're editing a solo vocal, a rhythm guitar or multitrack drums, Flex Time has a mode designed to give you the best results.

- Speed Fades
Get creative by adding turntable-style starts or stops with the kind of precision that would impress even the best DJs.

- Tempo Import/Export
Now the audio you import can automatically conform to the tempo of a project you're working on. (And the other way around.)


Production Tools
New production tools allow musicians to tackle any part of the recording, editing and mixing process they want — and get it done in a fraction of the time.

- Selective Track Import
To transfer setups and track content between projects, simply select the individual components you want to import on a track-by-track basis.

- Expanded take folder editing
Logic Pro 9 gives you access to your most important edit operations — including cut, copy, paste, fades and crossfades — alongside Quick Swipe comping.

- Drum Replacer
Now you can replace or double less-than-perfect drum tracks with triggered samples in just a few clicks. No more headaches. No more hassles.

- Convert to Sampler Track
In one step, turn an audio region into a sampler instrument with a MIDI track to trigger it. Then you can modify and resequence the part.

- Bounce-in-Place
The new Bounce-in-Place feature makes effects rendering much quicker and easier, whether you're bouncing a single region or an entire track.

- Notation and chord grids
Create guitar tablature or detailed scores using a library of more than 4000 chord grids (or your own custom grids) and new ornaments for hammer-ons, bends and more.

- Vocal Jam Pack
Build your song with a lead vocal, rappers, backup singers, an entire choir, or even software instruments based on the human voice and body.

- Warped Effects for Space Designer
More than 450 warped impulse responses radically transform what Space Designer can do, allowing you to give ordinary sounds a bizarre, other-worldly quality.


Guitar Gear
Now you can mix and match amp heads, EQs, reverbs, speaker cabinets and mics—then creatively route your signal through an impressive new collection of stompboxes.

- Amp Designer
Build your dream rig by mixing and matching 25 amps, 25 speaker cabinets and 3 mics you can position freely around the speaker cone. Hear it now

- Pedalboard
Fire up 30 stompboxes that deliver lush effects like Overdrive, Distortion, Fuzz, Delay, Chorus, Flanger, Phaser, Tremolo, Treble Boost and Wah. Hear it now

- Classic tones
Hundreds of presets give you Amp Designer and Pedalboard sounds that are ready to go. Start exploring with classic tones, genres, or characteristics like clean, crunch and distorted.

- Apogee GiO support
This new USB audio interface and control device lets you operate Pedalboard hands-free and works with Logic Pro 9 and MainStage 2 right out of the box.

This Logic Pro 8.0.2 update addresses specific customer and compatibility issues of Logic Pro 8.0 and WaveBurner 1.5.

This update is recommended for all Logic Studio users. For more information about this release, please go to Logic 8.0.2 Details.

If you are using Logic Node you will need to update your Logic Node application on connected computers as well. After running this updater you will find an updated Logic Node installer called Logic Node 8.0.2.dmg in your Utilities folder.

This Logic Pro 8.0.1 update addresses specific customer issues and compatibility issues of Logic Pro 8.0 and WaveBurner 1.5.

If you are using Logic Node you will need to update your Logic Node application on connected computers as well. After running this updater you will find an updated Logic Node installer called Logic Node 8.0.1.dmg in your Utilities folder.

- Single-Window Design
The Arrange window in Logic Pro 8 consolidates production activities in a single, elegantly-designed workspace. You can record multiple takes; cut, move or stretch audio with sample accuracy; browse channel strip settings; audition Apple Loops; and drop chords onto your lead sheet—all from one central space, without managing multiple windows.

- Simplified Setup
Production-ready templates, a streamlined track setup window and dynamic channel strip creation get you up and running fast. Improved ReWire support provides easy integration with other music applications.

- Effortless multitake recording
Region-based take management speeds up multitake recording, editing and processing. An expandable take folder makes it simple to recall overdubs, and entire take folders can be moved and edited like regions.

- Quick Swipe comping
With breakthrough Quick Swipe comping, you can simply swipe over the best portions of each take to create a seamless comp, complete with transition-smoothing crossfades.

- New audio editing tools
Work faster and with greater precision using powerful new features like snap-to-transient selection, graphical time stretching and sample-accurate editing in the Arrange window.

- Surround mixing and processing
Logic Pro 8 allows for end-to-end surround production with multichannel tracks and busses. True Surround and multi-mono support lets you use any surround, stereo or mono plug-ins within any surround project.

- Portable preferences
Save your key commands, channel strip settings and plug-in settings to your .Mac account for easy backup, sharing and portability.

- XSKey-free operation
A simple serial number replaces the USB dongle and lets you make music without the hassle of extraneous hardware.

Logic Pro 7.2.3 addresses performance issues when Logic Pro 7 is used on Mac Pro and G5 Quad computers. Logic Pro 7.2.3 is recommended for all Mac Pro and G5 Quad users. An existing Logic Pro 7.2.1 or Logic Pro 7.2.2 installation is required for this update.

Note: Logic Pro 7.2.3 is optimized for PowerPC G4, G5 and Intel based Macs with up to 2 dual-core processors.

Logic Pro 7.2.2 improves compatibility with the Mac Pro and delivers:
Increased performance through full use of the Mac Pro Quad-core architecture
Optimized support for the built-in audio ports

Logic Pro 7.2.2 is recommended for all Mac Pro users. An existing Logic Pro 7.2.1 installation is required for this update.

Logic Pro 7.2.1 is a maintenance release that addresses isolated reliability and compatibility issues in the following areas:

-Intel Macs: ReWire and ReCycle support, Standard MIDI file export, OMF import, VSL EXS instrument compatibility
-Blank Sample Editor window in some circumstances
-Unexpected halt of software instrument output
-Compatibility with Logic 7.1 songs
-Direct playback of MP3 files
-EuCon support for the Euphonix MC and CM408T control surfaces

Universal compatibility
Logic Pro 7.2 is a Universal application, which means it's designed to run natively on both Intel- and PowerPC-based Macs. Stay compatible as Apple continues to deliver new Intel-based systems.

Integrated support for new Apogee Ensemble interface
Logic Pro 7.2 offers integrated support for Ensemble, the new FireWire audio interface solution from Apogee Electronics, providing superb Apogee sound quality and mix-and-match expandability at breakthrough prices. Multiple parameters — including headphone level, metering source, output levels, and even microphone input gain — can be manipulated from a control panel within Logic Pro.

Digidesign Pro Tools HD 7 DAE support
Logic Pro 7.2 is fully compatible with the Pro Tools 7.1 version of DAE. All features are supported, including ESB and EXS24TDM. (Users must install an updated Digidesign Stream Manager framework library file, which is downloadable from the Digidesign support website. Users of Pro Tools 6.9 and earlier must use Logic Pro 7.1 or earlier.)

Serato Pitch 'n Time support
Purchase a special Audio Unit version of the legendary Pitch 'n Time plug-in from Serato and you'll have access to its extraordinary algorithms directly from Logic Pro's Time and Pitch Machine or from the audio time stretch options in Logic's Arrange window. Available exclusively within Logic Pro 7.2, this option renders rich and natural-sounding results, even at extreme settings.

Improved Rewire support
Logic Pro 7.2 provides support for stereo Rewire objects — and now clearly labels the incoming Rewire streams to reflect the source application. In addition, you can create Rewire objects directly from the Create Multiple option in the Arrange window.

Enhanced support for control surfaces
The Arrange window in version 7.2 provides visual indication of which tracks are currently active on the control surface. This is especially useful with supported control surfaces that do not provide LCD or other feedback information, such as the newly supported iControl from M-Audio.

32-channel support for multi-channel Audio Units instruments
Users of multi-channel Audio Unit instrument applications — such as the popular BFD — will appreciate that Logic Pro now has increased output capacity of to 32 mono-channels.

Playback of compressed files
Logic Pro 7.2 allows you to play back AAC and Apple Lossless files directly — with no need for conversion. This feature ensures session compatibility with Garageband 3 and offers great sonic quality with the convenience of smaller file sizes.

Access to new GarageBand 3-compatible plug-ins
Ducker offers automated voiceover volume reduction functionality, known as "ducking," on Output or Bus tracks. Speech Enhancer provides a simple option for cleaning up and enhancing recordings made with the built-in microphones.

New royalty-free jingles and sound effects Apple Loops
Logic Pro 7.2 includes the same Jingles and Sound Effects library that ship with iLife '06. A dedicated Effects button in the Loop Browser makes it easy to view and filter this new collection of sounds. The library includes more than 200 sound effects and 100 jingles.

The Logic Pro 7.1.1 Update addresses isolated reliability issues. It also improves compatibility with Mac OS X version 10.4 (Tiger).
The most significant areas addressed are:

- MP3 and AAC import in Mac OS X Tiger
- Use of Scandinavian keyboard layout in Mac OS X Tiger
- Delay compensation of QuickTime movies
- OMF, AAF and XML compatibility
- DAE/TDM: Bounces with the Wave recording file type
- AudioSuite plug-in compatibility
- Automation of Ultrabeat parameters, Sculpture parameters and two state buttons

For more information on this update, see here .

The Logic Pro 7.1 update adds a generous collection of new features and sought after enhancements such as full native plug-in delay compensation and over 70 new key commands. It provides greater facility for creating and managing Apple Loops and a convenient new method for re-ordering Channel Strip plug-in configurations. Logic Pro 7.1 further extends the creative options with 5 new plug-ins including a Bass Amp and two hybrid synthesizers. The update is rounded out by a host of optimizations and refinements that significantly improve the performance and stability of both Logic Pro and the included, updated version of Waveburner.


1. Expanded Apple Loops Integration
Produce your own software instrument Apple Loops using any Logic Pro or Audio Unit plug-in. Place the software instrument Apple Loops onto an Audio Instrument track and the original MIDI performance and Channel Strip configuration is completely restored. Convert your ReCycle (REX) files into Apple Loops by simply dragging them into the Arrange window. Find your Apple Loops more easily by limiting which Jam Packs or other loop collections you wish to browse.

2. Full Native Plug-In Delay Compensation
Take advantage of full plug-in delay compensation which now corrects for latency produced on bus, auxiliary, and output channels in addition to every other path in the native audio mixer. You'll especially appreciate this enhancement if you own third party DSP cards like those developed by Universal Audio and TC Electronics.

3. New Instrument and Effect Plug-Ins
Add beef and character to your bass or other instruments with a new Bass Amp plug-in which replicates the sound of the industry's sweetest bass amplifiers and direct boxes. Tighten up any performance using the Enhanced Timing plug-in or be inspired by the massive atmospheric synth textures produced by two new Hybrid Synth instruments.

4. Hand Tool in Track Mixer
Freely move, copy and swap plug-ins between Channel Strip Inserts using the new Hand Tool in either the Arrange window or Track Mixer.

5. Over 70 New Key Commands
Speed up your workflow by assigning up to 70 new key commands to your favorite functions, including many of those introduced in 7.0 such as Open Loop Browser, Next/Previous Channel Strip, Create Multiple Tracks, Import Audio Files, and Bounce.

6. Numerous Plug-In Improvements
Swap, copy, and import Ultrabeat voices and sequences using a simple drag and drop operation. Export Ultrabeat patterns directly to the Arrange window also using drag and drop. Create or edit EXS24 instruments more easily using rubber-band selection of Zones and the ability to define Start Note and Width settings when importing multiple samples. Exploit new options for the Rotor effect in the EVB3, which also now has improved integration with the Hammond Suzuki XB-1, XK-2, and XK-3 hardware Drawbar controllers. Enjoy many other useful refinements made to Sculpture, Vocal Transformer, Pitch Correction and other plug-ins.

7. Support for 9 additional Control Surfaces
Increase your choices for compatible hardware control surfaces thanks to dedicated support for these 9 popular controller devices: Korg KONTROL49 and MicroKONTROL, Frontier Design Groups Tranzport, Tascam US-2400 and FW-1082, JL Cooper CS-32 and FaderMaster 4/100.

8. Follow Tempo Option for Recorded Audio
Enable the new "Follow Tempo" Region parameter for any audio recorded into your song, and Logic will time and pitch shift the file when you change the song's tempo or key.

9. Insert Chords from Chord Track
Simplify the process for placing chords in lead sheets using a new option which imports the chords from the Global Chord Track.

10. Multiple Performance Enhancements
Streamline your entire workflow as a result of numerous general optimizations and performance enhancements found in Logic Pro 7.1. Highlights include accelerated waveform overview creation, speedier initialization of Audio Units plug-ins during startup, the option to add files to the Audio Window after many audio file functions, improved handling of XML, AAF, and OMF file transfers, and more.

Compatibility fixes:

Apple Loops playback correctly in sessions with sample rates other than 44.1 kHz.
Recycle files consistently import as expected.
All Acid Loops transpose in Loop Browser as expected.
TDM tracks are successfully bounced even when native bounce is set to "offline".


Ultrabeat fixes:

Accents in sequencer now perform consistently.
There are no longer graphic glitches when copying step sequences.
The Import of Ultrabeat factory drum kits now works consistently.
Drum voices begin playback more quickly when auditioning while importing a Ultrabeat kit.
Automating more than one Ultrabeat drum voice now works as expected.


General fixes:

Loading a Channels Strip Setting will no longer switches the "Transpose" instrument parameter on.
The Guitar Amp mic position setting is not lost when loading a Channel Strip Setting from Logic Express into Logic Pro.
MIDI device names from Audio MIDI Setup or Logic Setup Assistant show up properly in default song.
Multi-Instrument Bank Messages won't change when importing a Song from Logic Pro 6.4.3.
"Goto Position" window does not inadvertently switch to current SPL position when opened.
"Send to MIDI > Maximum Volume" sends to all channels, not just channel 1.
Guitar Tablature preferences and tuning definitions can be entered via menu options again.
Screen updates now occur more consistently so there are less graphic glitches.
Audio Suite plug-ins process correctly regardless of whether there are open floating windows.
Both sides of a split stereo file are converted when performing a sample rate conversion within the Sample Editor.
Track Automation fixes:
The Copy/Convert function behaves properly.
The names of Pitch Correction plug-in parameters are displayed correctly.


Control Surface Support fixes:

Logic Control no longer generates notes in Learn mode.
All plug-in parameter names are displayed correctly.
Yamaha mixers no longer install multiple times in the Setup window.
Assignments are now possible in the Controls View.
Surround Joysticks work properly.

- Distributed Audio Processing : Run tons of plug-ins using additional G5 processor power.

- Apple Loops : Produce sound beds instantly from a comprehensive audio library.

- Three New Instruments :
Sculpture : Synthesize anything naturally via component modeling.
Ultrabeat : Bang out endless permutations on a modern drum machine.
EFM1 : From dreamy landscapes to punchy belltones with FM style.

- Nine New Effect Plug-ins :
Guitar Amp Pro : Dial in sweet guitar tones from arena to funk, live or in studio.
Linear Phase EQ : Manipulate EQ curves without corrupting phase.
Match EQ : Match acoustically two signals to transfer frequency spectrum.
Pitch Correction : Correct improper intonation on vocals or force to monotone.
Ringshifter : Add metallic sheen to any loop or sample for haunting effects.
Vocal Transformer : manipulate vocal lines, percussive signals or any other monophonic material
Multimeter : A powerful analysis and measurement tool for audio material

- Recall Channel Strips : Save all channel settings and parameters for future projects.

- Global Tracks : Control tempo, signature and more, all graphically.

- Shuffle Editing in Arrange : Restrain movement to prevent regions from overlapping.

- Auto Crossfades in Arrange : Apply crossfades automatically to overlapping regions.

- Software Instrument Layering : Play MIDI regions through multiple software instruments.

- EX24 Editing Improvements : Drag and drop audio and edit zones graphically.
...