|
 |
ADB
Port |
For keyboard, mouse, trackball, drawing tablet, or joystick. Do not plug or unplug one of these attachments when your Mac is turned on. |
|
 |
Modem or
printer
serial port |
For printer, modem, midi, or other devices ... |
|
 |
USB
port |
Replaces the old modem and printer ports and ADBs on the newer MACs (since the iMAC). Plug and play (computer does not have to be turned off to plug or unplug devices). |
|
 |
Apple Screen
Plug |
To plug in your Apple monitor. A VGA adapter is needed to plug in a PC monitor to this jack. |
|
 |
External
SCSI port |
For hard drives, removable storage devices, digital cameras, jaz, syquest, scanners, ....
NEVER plug or unplug when the MACis turned on.
Each peripheral must have a unique SCSI number: 1,2,4, 5 or 6 (the MAC is pre-assigned number 7, the internal disk the number 0 and the CD-ROM the number 3). If you have an internal SCSI drive separate from the external one or if your internal devices are configured with IDE you will have access to 0 and 3 for your external SCSI devices.
The last device in your SCSI chain must be terminated (devices/peripherals are either self-terminating or have a switch that can be set to on or off).
|
|
 |
External
SCSI port
on Powerbook |
for hard drives, removable storage devices, digital cameras, jaz, syquest, scanners, ...
and to connect to another MAC. Same comments as above. |
|
 |
SCSI Port
on
hard drives |
Most hard drives come with a 50 pin SCSI plug. You must therefore always use a "25/50" cable to connect to a MAC. Other peripherals are added to the SCSI chain using "50/50" cables. The quality of the these cables is the most important factor in the proper functioning of the peripherals, particularly when there are several of them. |
|
 |
Firewire
Port
|
For hard drives, removable storage devices, digital cameras,jaz, scanners, .... and for connecting to another MAC.
The main difference between firewire and SCSI connection ports are that firewire are "hot" connectable (computer can be turned on), there are no device numbers used, and they don't need to be terminated. |
|
 |
Power cord
plug |
For main power plug. |
|
 |
Secondary
monitor |
Power plug for a monitor. Allows monitor to turn on as soon as your MAC boots up. |
|
 |
AAUI
for Network |
Used in conjunction with an adapter to allow connections with a network using RJ45 or BNC base. |
|
 |
BNC for
10base2 networks |
To connect to a 10base2 network. All the connections are made in series with the use of a BNC adapter in a 'T' formation on a long coaxial cable with BNC terminators on both ends. |
|
 |
RJ45 for
10base-T
100base-T
networks |
Network Plug to connect to a 10baseT or 100baseT network. All of the connections are made in a star shape out of a main hub. |
|
These images are protected by copyright. They are reproduced on these web pages
with the kind authorization of the Conector company which retains all rights.
|
